Cisco Nexus - N5K-C5672UP - 48x 1/10GbE SFP+ - 16x Unified Ports - 6x 40GbE QSFP+ - 2x NXA-PAC-1100W - 3x FAN-F - Front-to-Back Airflow - 1U
- SKU:
- NSB 567200
- Availability:
- 1 in stock
- Condition:
- Used
- Shipping:
- Free Shipping (USA)
- Processor:
- Xeon Processor @ 1.80 GHz
- Operating System:
- Cisco NX-OS
Cisco Nexus N5K-C5672UP 48x 10G SFP+ 6x 40G QSFP+ Switch
The Cisco Nexus N5K-C5672UP is a compact 1U high-performance data center switch designed for 1/10/40 Gigabit Ethernet, Fibre Channel, and Fibre Channel over Ethernet environments. It provides 48 fixed SFP+ ports, including 16 Unified Ports, along with six 40GbE QSFP+ interfaces.
This configuration is fully populated with two Cisco NXA-PAC-1100W 1100W Platinum hot-swappable AC power supplies and three N6K-C6001-FAN-F hot-swappable fan modules. Both the power supplies and fans use matching port-side exhaust / front-to-back airflow.
Manufacturer: Cisco
Series: Nexus 5600 Series
Model: Nexus 5672UP
Part Number: N5K-C5672UP
Product Type: Unified Data Center Network Switch
SFP+ Ports: 48x 1/10GbE
Unified Ports: 16x Ethernet / FCoE / Fibre Channel
QSFP+ Ports: 6x 40GbE
Power Supplies: 2x NXA-PAC-1100W 1100W Platinum AC PSU
Fans: 3x N6K-C6001-FAN-F
Airflow: Front-to-Back / Port-Side Exhaust
Switching Capacity: 1.44Tbps
Forwarding Rate: 1.071 Billion Packets Per Second
Operating System: Cisco NX-OS
Form Factor: 1U Rackmount
Key Features
- 48x fixed 1/10 Gigabit Ethernet SFP+ ports
- 16x Unified Ports within the 48-port SFP+ configuration
- Unified Ports support 10GbE, FCoE, and 2/4/8Gb Fibre Channel
- 6x fixed 40GbE QSFP+ ports
- 40GbE QSFP+ to 4x10GbE breakout support
- Up to 72x 10GbE interfaces with compatible breakout cables
- Layer 2 and Layer 3 nonblocking switching
- 1.44Tbps switching capacity
- Up to 1.071 billion packets per second forwarding
- Low-latency cut-through forwarding
- Cisco NX-OS operating system
- 2x 1100W Platinum hot-swappable AC power supplies
- 1+1 redundant power supply configuration
- 3x hot-swappable fan modules
- 2+1 fan redundancy
- Matching front-to-back airflow configuration
- 1U rackmount chassis
Network Interfaces
- 48x fixed SFP+ interfaces
- 1GbE and 10GbE Ethernet support
- All 48 fixed ports support Ethernet and FCoE
- 16x Unified Ports support Ethernet, FCoE, and Fibre Channel
- 6x 40GbE QSFP+ interfaces
- QSFP+ ports support compatible 4x10GbE breakout connectivity
- SFP/SFP+ and QSFP+ transceivers are not included unless specifically stated
Unified Ports & Fibre Channel
- 16x Unified Ports
- 10GbE Ethernet support
- Fibre Channel over Ethernet support
- 2Gb Fibre Channel support
- 4Gb Fibre Channel support
- 8Gb Fibre Channel support
- Provides converged LAN and SAN connectivity from a single switch
Performance
- Layer 2 and Layer 3 hardware forwarding
- 1.44Tbps switching capacity
- Up to 1.071 billion packets per second
- Approximately 1 microsecond cut-through latency
- Line-rate forwarding across all ports
- Jumbo frame support up to 9216 bytes
Power Supply Configuration
- 2x Cisco NXA-PAC-1100W power supplies installed
- 1100W maximum rated output per power supply
- 80 PLUS Platinum-class efficiency
- Hot-swappable power supply design
- 1+1 redundant configuration
- 100-240V AC nominal input
- 90-264V AC supported input range
- Port-side exhaust airflow
- Front-to-back chassis airflow
Cooling Configuration
- 3x Cisco N6K-C6001-FAN-F fan modules installed
- Full fan configuration
- Hot-swappable fan modules
- 2+1 fan redundancy
- Front-to-back airflow
- Fan-side intake / port-side exhaust
- Fan airflow matches the installed NXA-PAC-1100W power supplies
Layer 2 & Layer 3 Features
- IEEE 802.1Q VLAN support
- Cisco EtherChannel and LACP
- Cisco Virtual PortChannel (vPC)
- Private VLAN support
- Rapid PVST+ and MSTP
- Static Routing
- OSPF
- EIGRP
- BGP
- IS-IS
- VRF support
- ECMP support
- IPv4 and IPv6 capabilities
- Feature availability may depend on installed NX-OS software and licensing
Data Center Features
- Fibre Channel over Ethernet
- VXLAN bridging and routing
- Cisco FabricPath
- Cisco Nexus Fabric Extender support
- Data Center Bridging
- Priority Flow Control
- RoCE support
- Converged LAN and SAN architecture
Included
- 1x Cisco Nexus N5K-C5672UP Network Switch
- 2x Cisco NXA-PAC-1100W 1100W Platinum AC Power Supplies
- 3x Cisco N6K-C6001-FAN-F Fan Modules
Important Notes
- Photos are for reference only.
- Only listed items are included.
- This configuration includes 2x NXA-PAC-1100W power supplies and 3x N6K-C6001-FAN-F fan modules.
- The installed PSU and fan modules provide matching front-to-back / port-side exhaust airflow.
- The switch provides 48x SFP+ ports, with 16 functioning as Unified Ports.
- The 16 Unified Ports support 2/4/8Gb Fibre Channel, 10GbE, and FCoE.
- The six QSFP+ interfaces support 40GbE and compatible 4x10GbE breakout configurations.
- Verify compatibility before purchase.
PCSP Standard 1 Year full coverage of parts, labor, and shipping.
Installing this unit at a commercial location?
This unit is eligible for on-site service with PCSP Securit. Click here to learn more
Model
- Brand:
- Cisco
- Series:
- Cisco Nexus
- Model Number:
- N5K-C5672UP
- Form Factor:
- 1U
Quick Info
- Shipping:
- Free Shipping
- Power Supply:
- Internal Hot-Plug / Redundant
Processor
- Processor:
- Xeon Processor @ 1.80 GHz
- Processors Installed:
- 1
- Processor Speed:
- 1.80 GHz
Graphics
Memory
Storage
Optical Drive
Software
- Operating System:
- Cisco NX-OS
Display
Connectivity
Front Panel Ports
Back Panel Ports
Keyboard & Mouse
Dimensions & Weight
- Length:
- 17.30 in.
- Width:
- 30.00 in.
- Height:
- 1.72 in.
- Weight:
- 32.00 LBS.
