Used Cisco Meraki switches
Cisco Meraki MS switches are cloud-managed: configuration, monitoring and firmware run from the Meraki Dashboard instead of a command line. Every Meraki device needs an active Meraki license in your Dashboard organization to operate, and a device can be claimed by only one organization at a time.
PCSP lists used Meraki MS350 and MS410 switches in stock with prices, tested before they ship, along with Meraki power supplies, fans, SFP modules and stacking cables. Meraki licenses are not included: you buy them from an authorized Cisco Meraki partner and apply them in your own Dashboard.
Meraki models on this page
| Model | Ports | Uplinks | Notes |
|---|---|---|---|
| Meraki MS350-48LP | 48× 1G copper, PoE+ | 4× 10G SFP+ | Stackable; listed with one or two 640 W or 1025 W power supplies |
| Meraki MS410-32 | 32× 1G SFP fiber | 4× 10G SFP+ | Fiber aggregation, Layer 3 |
| Meraki MR36 / MR46 | Wi-Fi 6 indoor access points | — | By quote |
Stock changes daily; the listing above shows what is available now.
Before you buy a used Meraki switch
- License. A Meraki switch works only with an active license in your organization. Budget for it alongside the hardware.
- Ownership in Dashboard. A used device must be released from its previous Dashboard organization before you can claim it.
PCSP is not a Cisco authorized reseller.
Frequently asked questions
Does a used Meraki switch need a license?
Yes. Every Meraki device needs an active Meraki license in your Dashboard organization to operate. Licenses are not included with used hardware from PCSP; you buy them from an authorized Cisco Meraki partner.
Can I claim a used Meraki switch in my Dashboard?
Only after it has been released from the previous owner’s organization: a Meraki device can belong to one Dashboard organization at a time.