Cisco - WS-C2960XR-48TD-I - 48x Gigabit - RJ45 - 2x 10G SFP+ Uplink - 2x SFP+ - Fiber Stack Ports - IP Lite - Layer 3 - 216Gbps - 130.9Mpps - 1U - Non-PoE
- SKU:
- NTK 9920853
- Availability:
- out of stock
- Condition:
- Used
- Shipping:
- Free shipping (USA)
- Processor:
- Dual Core 600 MHz
- Operating System:
- Cisco IOS
Cisco Catalyst WS-C2960XR-48TD-I 48-Port Gigabit IP Lite Switch
The Cisco Catalyst WS-C2960XR-48TD-I is a stackable 1U enterprise network switch featuring 48 Gigabit Ethernet RJ45 access ports, two 1Gb/10Gb SFP+ uplink ports, Cisco IP Lite software, and Layer 3 routing capabilities.
This configuration also includes two SFP+ fiber stacking ports through the Cisco FlexStack-Extended architecture. These stacking ports are intended for switch-to-switch stacking and are separate from the two front-panel SFP+ network uplink ports.
Manufacturer: Cisco
Series: Catalyst 2960-XR
Model: WS-C2960XR-48TD-I
Access Ports: 48x 10/100/1000BASE-T RJ45
Network Uplinks: 2x SFP+ 1Gb/10Gb
Stack Ports: 2x SFP+ FlexStack-Extended Fiber
Software: Cisco IOS IP Lite
Switching Capacity: 216Gbps
Forwarding Bandwidth: 108Gbps
Forwarding Rate: Up to 130.9Mpps
PoE: No
Form Factor: 1U Rackmount
Network Ports
- 48x 10/100/1000BASE-T Gigabit Ethernet RJ45 access ports
- 2x SFP+ network uplink ports
- SFP+ uplinks support compatible 10GbE SFP+ connectivity
- Compatible 1GbE SFP operation supported on the uplink interfaces
- Non-PoE data-only access ports
Stacking
- 2x SFP+ FlexStack-Extended fiber stacking ports in this configuration
- Dedicated stacking interfaces - not standard network uplinks
- Supports Cisco Catalyst 2960-XR stacking
- Up to 8 compatible Catalyst 2960-XR switches per stack
- FlexStack-Extended fiber stacking bandwidth up to 40Gbps
- Fiber stacking requires compatible Cisco-supported SFP+ optics and cabling
Performance
- 216Gbps full-duplex switching bandwidth
- 108Gbps forwarding bandwidth
- Up to 130.9 million packets per second forwarding rate
- Up to 1023 active VLANs
- 4096 available VLAN IDs
- 9216-byte Ethernet jumbo frame support
- 9198-byte Layer 3 MTU support
Layer 3 / IP Lite Features
- Cisco IOS IP Lite feature set
- IPv4 and IPv6 routing support
- Static routing
- RIPv1 / RIPv2 / RIPng support
- OSPF routed-access support
- Enhanced Layer 3 capabilities compared with LAN Base models
- Hardware-based IP routing
Hardware
- APM86392 600MHz dual-core processor architecture
- 128MB flash memory
- USB Type-A storage interface
- USB Type-B console interface
- RJ45 console interface
- Dedicated 10/100 RJ45 management interface
Power
- Standard power supply: Cisco PWR-C2-250WAC
- 250W AC power supply for non-PoE Catalyst 2960-XR models
- Two field-replaceable power supply bays
- Supports redundant hot-swappable power supplies
- Second power supply is optional unless specifically listed
- This model does not provide PoE or PoE+
Physical Specifications
- 1U rackmount form factor
- Dimensions: approximately 1.75 x 16.0 x 17.5 inches
- Approximate switch weight: 13.3 lb / 6.1 kg
- Front and side intake to rear exhaust airflow
Included
- 1x Cisco Catalyst WS-C2960XR-48TD-I Switch
- 1x Installed FlexStack-Extended Fiber Module with 2x SFP+ stacking ports
Important Notes
- Photos are for reference only.
- This is a non-PoE switch.
- The two front SFP+ ports are network uplink ports.
- The two additional SFP+ ports in the FlexStack-Extended module are dedicated stacking ports and should not be advertised as four standard network uplinks.
- Verify compatibility before purchase.
PCSP Standard 1 Year full coverage of parts, labor, and shipping.
Installing this unit at a commercial location?
This unit is eligible for on-site service with PCSP Securit. Click here to learn more
Model
- Brand:
- CISCO
- Series:
- Catalyst
- Model Number:
- WS-C2960XR-48TD-I
- Form Factor:
- 1U
Quick Info
- Power Supply:
- 250W
- Shipping:
- Free shipping
Processor
- Processor:
- Dual Core 600 MHz
- Processors Installed:
- Dual Core 600 MHz
- Processor Speed:
- 600 MHz
Graphics
Memory
Storage
Optical Drive
Software
- Operating System:
- Cisco IOS
Display
Connectivity
Front Panel Ports
Back Panel Ports
Keyboard & Mouse
Dimensions & Weight
- Length:
- 1.75 in.
- Width:
- 16.00 in.
- Height:
- 17.50 in.
- Weight:
- 13.30 LBS.