New in Box - Cisco Aironet 3802i Dual-Band 802.11ac Wave 2 Access Point
Form Factor: Indoor, low-profile ceiling or wall mountable
Network Interface: 1x 100/1000/2500/5000 Multigigabit Ethernet (RJ-45), 1x 100/1000BASE-T (RJ-45 AUX), 1x RJ-45 Console
Power Supply: PoE+ 802.3at / UPoE 802.3bt or external DC supply (AIR-PWR-50=)
PSU QTY: N/A
Operating System: Cisco AireOS / Cisco IOS-XE (Controller-based or Mobility Express)
Rail Kit: N/A
Ports: 1x mGig RJ-45, 1x AUX RJ-45, 1x Console RJ-45, 1x USB 2.0
Header 1: Regulatory Domain
Info 1: -B (North America / United States / Canada)
Header 2: MIMO / Spatial Streams
Info 2: 4x4 MU-MIMO with 3 spatial streams
Header 3: PHY Data Rate
Info 3: Up to 5.2 Gbps aggregate physical throughput
Header 4: Radio Architecture
Info 4: Flexible Radio Architecture (Dual 5 GHz or 2.4 GHz + 5 GHz)
Identifier: AIR-AP3802I-B-K9
Ears Included: N/A
Feature Sets: CleanAir Spectrum Intelligence, ClientLink 4.0, Cross-AP Noise Reduction, BandSelect, 4x4 MU-MIMO
Fixed Uplinks: 1x 5 Gbps Multigigabit Ethernet (mGig)
Total 10/100/1000 Ethernet Ports: 1 (AUX Port)
Available PoE Power: N/A
Switching Capacity: N/A
Stacking Bandwidth: N/A
Total number of MAC addresses: N/A
Total number of IPv4 routes: N/A
FNF entries: N/A
DRAM: 1024 MB
Flash: 256 MB
VLAN IDs: Up to 16 BSSIDs / VLAN mappings per radio
Total switched virtual interfaces (SVIs): N/A
Jumbo frame: Supported on mGig interface
Total routed ports per stack: N/A
Number of access points per switch/stack: Up to 100 APs (when running internal Mobility Express controller)
Number of wireless clients per switch/stack: Up to 2,000 wireless clients (Mobility Express mode)
Total number of WLANs per switch: Up to 16 WLANs
Wireless bandwidth per switch: Up to 5.2 Gbps aggregate physical data rate
Supported Aironet access point series: Cisco 3800 Series
Forwarding Rate: Up to 5.2 Gbps aggregate PHY rate
Features:
- Dual-band radios with Flexible Radio Architecture (FRA) for high-density environments
- Multigigabit Ethernet (mGig) port supports up to 5 Gbps over standard Cat5e/Cat6 cabling
- 4x4 MU-MIMO technology with 3 spatial streams delivering exceptional client capacity
- Integrated Cisco CleanAir technology for proactive spectrum intelligence and RF interference mitigation
- Modular design supports expansion modules for future IoT and radio capabilities
(AIR-AP3802I-B-K9)
PCSP Standard 1 Year full coverage of parts, labor, and shipping.
Installing this unit at a commercial location?
This unit is eligible for on-site service with PCSP Securit. Click here to learn more