null
Server & Workstation RAM at Wholesale Volume Pre-tested Ships Today

Used Power Supplies

Hot-swap server power supplies for Dell, HPE, Lenovo, and Supermicro — matched by wattage and part number and tested under load. Add a second unit for redundancy on a budget.

Power Supplies

Server Power Supplies — Dell & HPE Hot-Swap PSUs

Need a replacement server power supply? We stock hot-swap PSUs matched by wattage and part number for Dell PowerEdge, HPE ProLiant, Lenovo, and Supermicro servers — browse Dell power supplies in their own collection — plus workstation PSUs for Dell Precision and HP Z towers. Every unit is load-tested before it ships, so a failed server power supply or an empty redundancy bay is a same-week fix instead of a support ticket.

Getting the Right PSU

  • Part number first: server PSUs are platform-specific modules — match the part number or tell us the server model and installed wattage.
  • Wattage pairs: redundant supplies should match in wattage and efficiency rating; mixing sizes forfeits redundancy on most platforms.
  • Fill the second bay: a second PSU plus a second power feed is the cheapest availability upgrade a rack server can get.
  • Power budget: adding GPUs or more drives? Check the combined draw before reusing the original supplies — we can advise on the right wattage for your configuration.

Server PSUs by Platform

Server power supplies are platform-specific modules, not generic ATX units — the connector, form factor and firmware handshake are all tied to the chassis. We stock hot-swap supplies for Dell PowerEdge, HPE ProLiant, Lenovo and Supermicro servers, plus fixed and hot-swap units for Dell Precision and HP Z workstations. Wattages in stock span the range from low-draw single-socket boxes up to fully populated dual-socket and GPU chassis; if you tell us the server model and the wattage currently installed, we will match the part rather than have you decode it.

  • Match the part number where you can — it removes every compatibility question at once. Dell units have their own collection: Dell power supplies.
  • Keep redundant pairs identical in wattage and efficiency rating; mismatched supplies will run, but the chassis will usually log it and may derate.
  • Workstation towers take a different family of supplies from rack servers — send the model if you are unsure which you are looking at.

Spares and Volume

A dead PSU on a single-supply box is downtime, which is why a shelf spare per platform is the cheapest insurance in a rack. For fleets we quote spares in sets — request a quote with the model and quantity. Every unit is load-tested before it ships.

Why Buy Power Supplies from PCSP

  • Load-tested: every PSU is verified under load before listing.
  • Matched: we confirm part-number compatibility with your exact chassis.
  • 90-day returns: DOA or non-conforming units come back on us.
  • Fast shipping: in-stock units ship the same business day when ordered before 1:00 pm EST.

Racking the server too? Grab the matching rail kit and front bezel in the same order.

Quick Answers: Buying from PCSP

Can I mix a 750 W and an 1100 W supply in one server?

Do not plan on it. Redundant bays expect matching wattage and efficiency rating; most platforms either refuse the mismatched pair or quietly give up redundancy, which defeats the point of the second supply. Buy the pair matched — or match the one already installed.

Can I install higher-wattage PSUs than the originals?

Yes, as long as your chassis supports that module family and you upgrade both bays together. It is the standard move when added GPUs or extra drives push the power budget past the original supplies — tell us your configuration and we will size it.

How do I find which PSU my server takes?

Read the part number off the label on the installed supply — hot-swap units pull out without tools, so checking takes a minute. Or simply send us the server model and installed wattage and we will match the correct module.

Are used power supplies safe to run?

Every unit is load-tested before shipping, and hot-swap PSUs are field-replaceable modules designed to be swapped in service. Dead-on-arrival or non-conforming units are covered by 90-day returns, and in-stock supplies ship the same business day on orders before 1:00 pm EST, with free ground shipping on orders over $35 to the contiguous United States.